Search Related Marketplaces
icon
Industrial
icon
Aerial
icon
Truck
icon
Trailer
CONTACT SELLER
D & W Group - Red Trac
D & W Group - Red Trac

   905-562-4136
  

    Address:
2695 Regional Rd #24 South
Vineland, Ontario
L0R 2C0

    View All Inventory
    Visit Dealer Web Site

Farm king Backsaver Auger - 10 / 13 / 16 Contact for Price Back to Search Results  register
  send to a friend        Ship this Item         Apply For Financing         print this Ad         Can't find it?
No image available for this ad listing image listing image listing image listing image


Documents:





INFORMATION DETAILS

ID:  13650975

Year:  2017

Make: Farm King

Model: Backsaver Auger - 10 / 13 / 16

Type: New

MSRP:  N/A Engine Size - cc: N/A



SELLER DESCRIPTION
Farm King has been manufacturing backsaver augers for more than four decades. The same principles used back then still apply today when choosing materials that go into every auger, grade A steel and functional design. Models range in lengths of 50 to 104 feet accompanied by 10, 13 and 16-inch tube sizes. A patented bridge –like support system allows the auger tubing and flighting to remain stable at all times including raising and lower of the auger. The hydraulic scissor lift resurrects the auger in virtually no time at all. When the spout is in the desired location, a safety hydraulic ball valve can be adjusted to ensure the augers stays when and where you want even in unpredictable weather. The recommended horsepower for peak operation ranges from 40-175 depending on auger size.
  Features
The self-leveling hopper on the swing-away auger remains level even when the main auger is elevated to its maximum height. A single flighting hopper is standard on the 10" and 13", while the optional dual flighting low-profile hopper (standard on the 16") reduces hopper height by more than 2-1/2". The swing-away auger can be positioned on the right side or left side of the auger, adding flexibility for yards with limited space or restricted access. A power mover, optional on the 10" and 13" and standard on the 16", uses two hydraulic motors that move the swing-away auger, limiting the physical labor required. The tapered thrust bearing at the top of the auger is torqued to remove pressure on the bottom end bearing for longer life and better wear.

Farm King Backsaver Augers feature two internal gearboxes for the intake auger assembly. Easy to maintain and service, these gearboxes do not restrict auger capacity. Cleanout is simplified with an optional reverse kit and an underside access panel.

The scissor lift undercarriage, exclusive to Farm King Backsaver Augers, requires less hydraulic pressure to raise and lower the auger. The wide undercarriage is stable and solid while still meeting transportation requirements. When the auger is at the desired position, a shut-off valve on the underside of the tube limits the circulation of the hydraulics so the auger will maintain its height.
  Specifications - 10" / 13"

Model 1050 1060 1070 1080*
Size 10" x 50' 10" x 60' 10" x 70' 10" x 80'
Tubing 12 gauge
Flighting 7 gauge
Flighting shaft 11 gauge, 2-3/8" diameter
Undercarriage 3" x 3" x 1/8" square tube
Lift arms 2" x 5" x 3/16" tube
Bridging 3/8" cable on 50' and 60' models, 1/2" cable on 70' and 80' models
Wheels and hubs 15" with 5 bolt automotive type hubs and bearings
Swing auger drive Two internal gearboxes (PTO driven), sprocket and chain
Hopper dimensions 43-1/2" x 60"
Standard hopper height from ground* 15-1/4" at heel end, 14-1/4" at other end
Multi flighting hopper height from ground* 11-3/4" at both ends
Tractor requirements
- min. PTO hp (w/540 RPM PTO)
- approx. hydraulic requirements for lift

40
1000 PSI

48
1000 PSI

55
1000 PSI

65
1000 PSI
Hitch weight - - 840 lb  
Weight 2545 lb 2987 lb 3354 lb 3622 lb
 

Model 1370 1385 1395*
Size 13" x 70' 13" x 85' 13" x 95'
Tubing All sections 12 gauge
Flighting 1/4" flighting in swing-away and main auger
Flighting shaft 11 gauge, 2-3/8" diameter
Undercarriage 70' - 3-1/2" x 3-1/2" x 3/16" square tube;
85' and 95' - 4" x 4" x 1/4" square tube
Lift arms 1/4" formed tubing upper, 7 gauge lower
Bridging 1/2" cable
Wheels and hubs 15" with 6 bolt automotive type hubs and bearings
Swing auger drive Two internal gearboxes (PTO driven), sprocket and chain
Hopper dimensions 43-1/2" x 60"
Standard hopper height from ground* 16-3/4" at heel end, 16-1/4" at other end
Multi flighting hopper height from ground* 12-3/4" at both ends
Tractor requirements
- min. PTO hp (w/540 RPM PTO)
- approx. hydraulic requirements for lift

80
1200 PSI

90
1200 PSI

100
1200 PSI
Hitch weight 1140 lb 1270 lb  
Weight 5175 lb 6381 lb 6683 lb
 

Model 1050 1060 1070 1080* 1370 1385 1395*
Wheel track 9' 10' 12' 12' 12' 12' 12'
A, height †
- lowest
- half way
- highest

11' 2"
23' 6"
36'

11' 3"
27' 6"
43' 8"

12' 6"
30' 3"
48'

13' 6"
34' 3"
55'

13' 7"
31' 9"
50'

13' 8"
36' 6"
59' 6"

14' 8"
40' 6"
66' 4"
B, forward reach
- lowest
- half way
- highest

26'
-
18'

30' 3"
-
22' 3"

35' 8"
33' 5"
27' 10"

45' 7"
41' 10"
34' 9"

36' 11"
33'
27' 5"

45' 4"
39' 8"
31' 10"

55' 4"
48' 3"
38' 9"
 
All measurements taken with 18" hitch height. ‘A’ lowest is overall transport height, half way and highest are spout to ground measurements.
*includes 10' extension.
  Specifications - 16"

Model 1684 16104
Size 16" x 84' 16" x 104'
Tubing Tubes 1 and 2: 10 gauge
Tubes 3 and 4: 11 gauge
Tubes 1 and 2: 10 gauge
Tubes 3, 4, 5: 11 gauge
Flighting, thickness ¼" on swing and main auger
Undercarriage 5" x 5" x ¼" square tube
Lift arms ¼" formed tubing
Bridging Upper bridging - ¾" cable Upper bridging - ¾" cable
Side bridging - ½" cable
Wheel and hubs 6 bolt hubs, 11 L x 15 x 8 ply 8 bolt hubs,
16.5 L x 16.1 x 10 ply
Hopper dimensions, width x length x height 48" x 60" x 13-½"
Clearance in down position 13' 2" 14' 10"
Below spout to ground @ maximum lift 57' 77' 4"
Below spout to ground in down position 10' 2" 12' 5"
Reach - edge of wheels to center of spout down position 44' 10" 57' 8"
Reach - edge of wheels to center of spout
½ up position (44' 3" spt-grd)
42' 52'
Reach - edge of wheels to center of spout
up position
33' 4" 36' 1"
Tube angle, up position 44° 44°
Tube angle, down position
Wheel track outside of wheels 13' 4' 14' 5-½"
Hitch weight in down position 2,200 lb 2,700 lb
Overall weight 11,000 lb 13,000 lb
Tractor requirements
- Minimum PTO horsepower
(w/1000 RPM PTO)
- Approximate hydraulic requirements for lift

150 hp
1500 PSI

175 hp
1500 PSI

 





Back
INFORMATION REQUEST
First Name*:
Last Name*:
Telephone*:
Email*:
Comments*:
Let's make sure you're human. Drag or click the correct shape on the left to move it to the grey "drop area" on the right
Submit
free want ad