Farm king Backsaver Auger - 10 / 13 / 16
| Price |
Contact for price |
Sale Type |
New |
| Year |
2017 |
Quantity |
N/A |
| Manufacturer |
Farm King |
Model |
Backsaver Auger - 10 / 13 / 16 |
| Vin |
N/A |
Color |
N/A |
| Date Received |
N/A |
Odometer |
N/A |
| Comments |
Farm King has been manufacturing backsaver augers for more than four decades. The same principles used back then still apply today when choosing materials that go into every auger, grade A steel and functional design. Models range in lengths of 50 to 104 feet accompanied by 10, 13 and 16-inch tube sizes. A patented bridge –like support system allows the auger tubing and flighting to remain stable at all times including raising and lower of the auger. The hydraulic scissor lift resurrects the auger in virtually no time at all. When the spout is in the desired location, a safety hydraulic ball valve can be adjusted to ensure the augers stays when and where you want even in unpredictable weather. The recommended horsepower for peak operation ranges from 40-175 depending on auger size.
Features
.igg{float:right; padding:10px;}
.tdg{border-bottom:1px solid #dedede;}
.ttl{width: 100%;
height: 30px;
background-color: #eeeeee;
line-height: 26px;
padding-top: 2px;
font-weight: bold;
color: #fff;
margin-top: 10px;
color: #df0101;
font-size: 14px;
clear: both;}
.list ul{list-style:disc; padding-left:10px;}
.list li{width:80%;}
The self-leveling hopper on the swing-away auger remains level even when the main auger is elevated to its maximum height. A single flighting hopper is standard on the 10" and 13", while the optional dual flighting low-profile hopper (standard on the 16") reduces hopper height by more than 2-1/2". The swing-away auger can be positioned on the right side or left side of the auger, adding flexibility for yards with limited space or restricted access. A power mover, optional on the 10" and 13" and standard on the 16", uses two hydraulic motors that move the swing-away auger, limiting the physical labor required. The tapered thrust bearing at the top of the auger is torqued to remove pressure on the bottom end bearing for longer life and better wear.
Farm King Backsaver Augers feature two internal gearboxes for the intake auger assembly. Easy to maintain and service, these gearboxes do not restrict auger capacity. Cleanout is simplified with an optional reverse kit and an underside access panel.
The scissor lift undercarriage, exclusive to Farm King Backsaver Augers, requires less hydraulic pressure to raise and lower the auger. The wide undercarriage is stable and solid while still meeting transportation requirements. When the auger is at the desired position, a shut-off valve on the underside of the tube limits the circulation of the hydraulics so the auger will maintain its height.
Specifications - 10" / 13"
.igg{float:right; padding:10px;}
.tdg{border-bottom:1px solid #dedede;}
.ttl{width: 100%;
height: 30px;
background-color: #eeeeee;
line-height: 26px;
padding-top: 2px;
font-weight: bold;
color: #fff;
margin-top: 10px;
color: #df0101;
font-size: 14px;
clear: both;}
.list ul{list-style:disc; padding-left:10px;}
.list li{width:80%;}
Model
1050
1060
1070
1080*
Size
10" x 50'
10" x 60'
10" x 70'
10" x 80'
Tubing
12 gauge
Flighting
7 gauge
Flighting shaft
11 gauge, 2-3/8" diameter
Undercarriage
3" x 3" x 1/8" square tube
Lift arms
2" x 5" x 3/16" tube
Bridging
3/8" cable on 50' and 60' models, 1/2" cable on 70' and 80' models
Wheels and hubs
15" with 5 bolt automotive type hubs and bearings
Swing auger drive
Two internal gearboxes (PTO driven), sprocket and chain
Hopper dimensions
43-1/2" x 60"
Standard hopper height from ground*
15-1/4" at heel end, 14-1/4" at other end
Multi flighting hopper height from ground*
11-3/4" at both ends
Tractor requirements
- min. PTO hp (w/540 RPM PTO)
- approx. hydraulic requirements for lift
40
1000 PSI
48
1000 PSI
55
1000 PSI
65
1000 PSI
Hitch weight
-
-
840 lb
Weight
2545 lb
2987 lb
3354 lb
3622 lb
Model
1370
1385
1395*
Size
13" x 70'
13" x 85'
13" x 95'
Tubing
All sections 12 gauge
Flighting
1/4" flighting in swing-away and main auger
Flighting shaft
11 gauge, 2-3/8" diameter
Undercarriage
70' - 3-1/2" x 3-1/2" x 3/16" square tube;
85' and 95' - 4" x 4" x 1/4" square tube
Lift arms
1/4" formed tubing upper, 7 gauge lower
Bridging
1/2" cable
Wheels and hubs
15" with 6 bolt automotive type hubs and bearings
Swing auger drive
Two internal gearboxes (PTO driven), sprocket and chain
Hopper dimensions
43-1/2" x 60"
Standard hopper height from ground*
16-3/4" at heel end, 16-1/4" at other end
Multi flighting hopper height from ground*
12-3/4" at both ends
Tractor requirements
- min. PTO hp (w/540 RPM PTO)
- approx. hydraulic requirements for lift
80
1200 PSI
90
1200 PSI
100
1200 PSI
Hitch weight
1140 lb
1270 lb
Weight
5175 lb
6381 lb
6683 lb
Model
1050
1060
1070
1080*
1370
1385
1395*
Wheel track
9'
10'
12'
12'
12'
12'
12'
A, height †
- lowest
- half way
- highest
11' 2"
23' 6"
36'
11' 3"
27' 6"
43' 8"
12' 6"
30' 3"
48'
13' 6"
34' 3"
55'
13' 7"
31' 9"
50'
13' 8"
36' 6"
59' 6"
14' 8"
40' 6"
66' 4"
B, forward reach
- lowest
- half way
- highest
26'
-
18'
30' 3"
-
22' 3"
35' 8"
33' 5"
27' 10"
45' 7"
41' 10"
34' 9"
36' 11"
33'
27' 5"
45' 4"
39' 8"
31' 10"
55' 4"
48' 3"
38' 9"
All measurements taken with 18" hitch height. ‘A’ lowest is overall transport height, half way and highest are spout to ground measurements.
*includes 10' extension.
Specifications - 16"
.igg{float:right; padding:10px;}
.tdg{border-bottom:1px solid #dedede;}
.ttl{width: 100%;
height: 30px;
background-color: #eeeeee;
line-height: 26px;
padding-top: 2px;
font-weight: bold;
color: #fff;
margin-top: 10px;
color: #df0101;
font-size: 14px;
clear: both;}
.list ul{list-style:disc; padding-left:10px;}
.list li{width:80%;}
Model
1684
16104
Size
16" x 84'
16" x 104'
Tubing
Tubes 1 and 2: 10 gauge
Tubes 3 and 4: 11 gauge
Tubes 1 and 2: 10 gauge
Tubes 3, 4, 5: 11 gauge
Flighting, thickness
¼" on swing and main auger
Undercarriage
5" x 5" x ¼" square tube
Lift arms
¼" formed tubing
Bridging
Upper bridging - ¾" cable
Upper bridging - ¾" cable
Side bridging - ½" cable
Wheel and hubs
6 bolt hubs, 11 L x 15 x 8 ply
8 bolt hubs,
16.5 L x 16.1 x 10 ply
Hopper dimensions, width x length x height
48" x 60" x 13-½"
Clearance in down position
13' 2"
14' 10"
Below spout to ground @ maximum lift
57'
77' 4"
Below spout to ground in down position
10' 2"
12' 5"
Reach - edge of wheels to center of spout down position
44' 10"
57' 8"
Reach - edge of wheels to center of spout
½ up position (44' 3" spt-grd)
42'
52'
Reach - edge of wheels to center of spout
up position
33' 4"
36' 1"
Tube angle, up position
44°
44°
Tube angle, down position
5°
5°
Wheel track outside of wheels
13' 4'
14' 5-½"
Hitch weight in down position
2,200 lb
2,700 lb
Overall weight
11,000 lb
13,000 lb
Tractor requirements
- Minimum PTO horsepower
(w/1000 RPM PTO)
- Approximate hydraulic requirements for lift
150 hp
1500 PSI
175 hp
1500 PSI
|
|
|
