Esc Mobile

Item Details

ID: 14808399
Make: Ski-Doo
Type: New

Year: 2020
Model: Freeride 146

Engine: ROTAX 850 E-TEC

Engine Details: Liquid-cooled, two-stoke, eRAVE™

Cylinders: 2

Bore: 82 mm / 3.2 in.

Stroke: 80.4 mm / 3.2 in.

Fuel Tank: 36 liters / 9.5 gallons

Dry Weight: 213 kg / 469 lb

Vehicle Overall Length: 3,110 mm / 122.4 in.

Vehicle Overall Width: 1,140 to 1,180 mm / 44.9 to 46.5 in.

Vehicle Overall Height: 1,348 mm / 53.1 in.

Ski Overall Length: 1,049 mm / 41.3 in.

Maximum Engine Speed: 7,900 RPM

Item Description

PROVE IMPOSSIBLE WRONG

The 2020 Freeride 146 is one of the most versatile snowmobiles in the market, with agile handling, extreme suspension capabilities, and ultra-responsive power for re-establishing the limits of any terrain. Available with E-TEC SHOT starter.

Features

ROTAX 850 E-TEC ENGINE

MORE POWER YOU CAN FEEL

The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the new pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant control you demand.

*Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines

E-TEC SHOT ENGINE STARTER

EASIEST STARTING

Push-button starting with almost no added weight. After an initial pull-start, the engine charges an ultracapacitor. Pushing the handlebar SHOT button for subsequent starts uses energy stored in the ultracapacitor to turn the magneto into an electric motor that rotates the flywheel, and with E-TEC technology, starts the engine. Eliminates nearly 20 lb. (9 kg) compared to conventional electric start. SHOT starting is only possible with Ski-Doo-exclusive E-TEC technology.

PDRIVE CLUTCH

QUICK,EFFICIENT,EASY

A major factor in the quickness of REV sleds is the new pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII.

COOL AIR FLOW

KEEPING IT COOL

Side panel venting improves airflow to drive components for cooler operations and optimal performance.

REV Gen4 PLATFORM

NEXT GENERATION OF A LEGEND

You’ll realize the benefits of our trail and mountain teams’ close cooperation in developing this sled because it has all the right features for both types of riding. It’s incredibly responsive and agile in cornering and boondocking, thanks to its centralized masses and light weight. Not to mention the power and instant response of the 850 E-TEC engine is ideal for hammering out of corners and powering out of a hole.

KYB PRO SHOCKS

PRO-LEVEL SHOCKS

These shocks are standard on the MXZx 600RS race sled - so you know they're extremely capable and durable for control in the toughest conditions. Remote reservoir design for performance and they are a rebuildable/revalvable. Easy Adjust compression damping knob does not require tools; rebound adjustments are standard as well.

RS RUNNING BOARDS

ROOM TO ROAM

Designed for aggressive stand-up riding, they are flatter for most of their length, wider and strong. Thicker aluminum sheet (3 mm vs. 1.8 mm), plus front and rear reinforcements to withstand tough landings.

TMOTION REAR SUSPENSION

CAPABILITY, CONTROL AND COMFORT

The tMotion flexes laterally, reducing the effort to initiate a roll, due to a ball joint at the center hinge between the rear arm and drop link and split flat-tube front arms. Very progressive motion ratio makes the ride on trails even more comfortable.

RAS 3 FRONT SUSPENSION

PRECISE ON-TRAIL,

AGILE OFF-TRAIL

Strikes the best balance between trail and mountain sled geometry and width to deliver great trail precision and off trail agility. State-of-the-art unequal length A-arm front suspension for the 50/50 rider. Adjustable ski stance for the ideal ride.