Case IH DH403
Contact for Price
listing image
  • listing image
  • listing image
  • listing image
  • listing image
  • listing image
  • listing image
  • listing image
Call 519-449-2500

Item Details

ID: 13649852
Make: Case IH
Type: New
Year: 2017
Model: DH403
Cutting Width, Ft In (m): 40' (12.19)
Maximum Angle, Below Horizontal, Degrees: 2 to 8
Weight W/ Reel, Lbs (kg): 6,040 (2740)
Knife Speed, Strokes Per Minute: 1400
Sickle Stroke, In (mm): 3.35 (85)
Reel Diameter, In (mm): np
Reel Speed Range, Rpm: 10 to 75
Belt Width, In (mm): 42 (1067)
Belt Speed, Maximum, Ft/min (m/min): 760 (232)
Double Swath Shift Means: Hydraulic
Windrow Center Delivery Width, In (mm): 56 to 72, or 80 (1422 to 1829, or 2032)
Double Swath Side Delivery Width, In (mm): No side delivery

Item Description

 Draper Headers

4 Models, 25-40 ft (7.6-12.2 m) Cutting Widths: Case IH DH3 series draper headers make quick work of big acreage, with double-knife and double-swath options. The heads are compatible with all Case IH WD3 Series II and WD4 windrowers.

More Acres, Less TimeMore Acres, Less Time

• Dual Circuit Header Drive provides more power to the knife drive and draper belts for faster cutting and better swath formation
• All-new 40-foot draper header covers more acres in less time
• Low-profile cutterbar cuts closer and cleaner to reduce harvest loss

Maximum Control with the Hydraulic Flotation SystemMaximum Control with the Hydraulic Flotation System

Allows the header to closely follow ground contours so you capture all the crop you grow. The return-to-cut feature uses cut height cylinders on each lift arm to easily return to the preset cutting height on each pass. Make this adjustment easily from the seat of the cab using the cut height control switches on the MultiFunction Propulsion Lever.

Transport OptionsTransport Options

Transport - 25 & 30 Ft. Headers
 
• Heads are available without transport system
• 2-wheel, removable/swing away transport system similar to DH2 Series
 
Transport - 35 & 40 Ft. Headers
 
• Integral 4-wheel dolly transport system

DH2 Cutterbar: Enhanced Cutting PerformanceDH2 Cutterbar: Enhanced Cutting Performance

• Low-profile design, ideal for harvesting short crops
• The large-diameter reel provides superior delivery of crops from the cutterbar to draper belts
• Choose from five- or six-bat pickup reels with steel or plastic fingers; Pickup reels lift crop to the cutterbar in downed crop conditions
• Durable cutterbar skid shoes (Recommended when running header close to the ground for a low cut height)
• The hay guard fits behind the cutterbar to direct crop on top of draper belts
DH3 Cutterbar: Cutterbar Improvements for Greater Operational Efficiency
 
Frame
 
• Tube design angled for increased strength and visibility
• Draper angle decreased from 20 degrees to 15 degrees for improved feeding and visibility
 
Ground Cutting and Crop Feeding
 
• Low profile bottom for close-to-ground cutting at lesser guard angle (7/8" at 2 degrees of tilt)
• Shallow-angled top section for improved crop feeding and reel cleaning
 
Cutting System
 
• Case IH cutting system with new raised style knife head (Shown)
• Schumacher cutting system (Shown)
• Case IH stub guard cutting system
 
Draper Deck
 
• Double V-Guide drapers for double life (reversible) and edge seal to keep trash out
• Improved deck sliding by shifting decks on UHMW blocks with added space to allow material to clean out
• Drive rollers at inside end of drapers for increased traction
 
Draper Deck Modifications
 
• Deck sizes standard between SSW and DSW units. Only difference being the end tin (2" wider on DSW units allowing opening to be made 4" smaller)
• 72" to 60" adjustable center-delivery heads
• 72" to 56" adjustable on double-swath heads
• Rear opening can be increased to 80" by removing back panel extensions
 
Gauge Wheel Configuration
 
• Coil spring-over-shock absorber
• Quick adjust design
• Provides superior ground following and float
• Increased strength in control arm
• New Crop dividers, with adjustable angle and interchageable ends (pipe and cone), are simple to install and reduce trampling.

 

 DH403 Highlights
With the widest cutting width at 40 ft plus single or dual knives and double swath or standard decks, the DH403 delivers cutting efficiency and superior productivity.
Quick Specs
 
Cutting Width: 40 ft (12.2 m)
Minimum Cut Height: 1 in (25 mm)