Kverneland PW - RW
| Price |
Contact for price |
Sale Type |
New |
| Year |
2017 |
Quantity |
N/A |
| Manufacturer |
Kverneland |
Model |
PW - RW |
| Vin |
N/A |
Color |
N/A |
| Date Received |
N/A |
Odometer |
N/A |
| Comments |
Efficient, flexible, easy to operate
The well proven Kverneland PW/RW “3 in 1 concept" consists of a robust semi-mounted plough in the front and a standard EG or LB mounted reversible plough at the rear.
Depending on weather and soil conditions, either use the whole wagon plough or only the front or the rear plough.
The Advantages:
robust design + Kverneland unique steels and heat treatment technology !
quality ploughing thanks to the 3 point linkage of the center section. It follows the ground at all times.
easy and safe to adjust and to operate (ATS, Isobus, manual management with the addition of a valve controller or manual management via tractor control)
unrivalled Auto-reset system for PW for non-stop ploughing. No maintenance. Shearbolt protection for RW
Variomat Vari-width® for On the Move or manual furrow width adjustments
"In Furrow" and/or "On Land"
stable and safe while turning and in transport
Packomat compatible
wide range of accessories
7 to 14 furrows
Models (Stepwise)
Interbody clearance cm
Underbeam clearance cm
Furrow width cm
No of furrows
PW
100
70/75
35 - 50
7 - 12
RW
100
70/80
35 - 50
7 - 12
Models (Vari-width®)
Interbody clearance cm
Underbeam clearance cm
Furrow width cm
No of furrows
PW
100
70/75
35 - 50
7 - 14
PW
115
70/75
35 - 50
7 - 10
RW
100
70/80
35 - 50
7 - 14
RW
115
70/80
35 - 50
7 - 10
Highlights
Unique frame robustness PW / RW
Importance of heat treatment
The frame is an essential part of the plough construction. For Kverneland quality standards, a non heat treated part is a weak part!
Kverneland frames are heat treated by induction twice. The temperature transfer to the steel is closely monitored. The frame gains 3 times as much strength. This unique Kverneland induction processes provides robustness and flexibility while ensuring an outstanding durability.
Stronger but not heavier
For the equivalent Kverneland robustness, competitors would use more steel in thickness or in dimensions, therefore producing a heavier frame.
Heavier frame impacts negatively pulling forces, wearing of parts, lifting capacities, tractor life time, and fuel consumption.
Long lasting
Weldings are also a critical weakness for a plough frame. Kverneland frames are supplied as one sole part!
Frame availability
120 x 200 mm 7-9 furrows
200 x 200 mm 10 and12 furrows
200 x 250 mm 12 and 14 furrows
The “tail” of the plough is either a 200 or a 300 head stock EG/LB plough
Vari-Width® (Variomat) System
Stepless Vari-width® system for infinite adjustments of working width, from 30 to 50 cm (12 to 20”) depending on models. Kverneland’s world patented system is available either with hydraulic or mechanical furrow adjustments.
Benefits:
Easy variation of ploughing capacity
Perfect match at all time between tractor capacity, implement and soil conditions
Time saving: up to 30% more capacity
Cost saving: up to 18% reduction in fuel consumption in relation with increased ploughing capacity
Better work: plough up to the hedges, fences, trees and ditches
Minimum wear: unique non-wearing linkage joint between the beams and the mainframe section
Perfect line of pull at all time. Kverneland’s Vari-width offers the correct parallel linkage along the whole plough. Therefore, lower draft requirement, minimum wear and tear.
Plough Bodies
Excellent Ploughing Quality
A complete range of bodies to suit all types of conditions.
They are renowned all over the world for their excellent ploughing quality, outstanding wear resistance and low draft requirements. Kverneland plough bodies are made of
The unique Kverneland steel. The 12 hours carburising heat treatment process result in:
the optimum wear resistance (sharp as a diamond)
the necessary flexibility to absorb impacts
Body No. 8
A general purpose body from medium to light soils. Capable of working at varying depths 15cm to 30cm (6 to 12 inches) and widths 30cm to 50cm (12 to 20 inches) with good cleaning and soil inversion characteristics.
Body No. 9
Like the No. 8, but even more highly “tuned”. Designed for wider and deeper ploughing at depths of 15 to 35 cm (6 to 14 inches). Suitable for heavier land where well turned and packed furrows are required.
Body No. 14
A plough body with a plastic mouldboard, for use in organic soils where sticking can be an acute problem. Similar performance to body No.19
Body No. 19
Specially designed for heavy soil, No.19 is also very good for burying large quantities of chopped or stripped straw. The angle of the mouldboard increases the clearance between the bodies in a very efficient manner. It also gives a totally inverted furrow which seals in the trash. The finished work is more broken, making secondary cultivation operations more efficient.
Body No. 28
Body No. 28 suits all soil types. Longer than body No.8, it creates a flatter profile for improved tilth. Its shape and action moves the soil further away from the landside, increases the furrow bottom width by as much as 25%. This allows wide tractor tyres to work in the furrow without rolling down the previous furrow. Suitable for depths of 15 to 30cm (6 to 12 inches) and widths from 35 to 50cm (14 to 20 inches).
Body No. 30
Finger mouldboard especially designed for sticky-stony soils. Capable of working between 20 cm and 35 cm deep (8 to 14”).
Auto-reset
Unbeatable in stony conditions !
Kvernelands fully automatic non-stop Auto-Reset System is unbeatable when it comes to trouble-free ploughing in stony conditions. The clever multi-leaf spring system allows the plough legs to release over stones and other solid objects in a smooth and efficient manner. This avoids sudden jolts and possible damage. Once the obstruction is passed, the plough body automatically returns to the correct ploughing depth.
Safety compliance
With today's demands for higher output, both tractor and plough are expected to perform quicker than ever. This makes more arduous demands on the equipment, particularly on the safety systems designed to protect tractors, ploughs and drivers against the dangers encountered whenever the plough meets hidden obstructions in the ground. The Kverneland Auto-Reset system guaranties this safety high standars requirements.
Adaptable to varying soil conditions
Depending of the type of soil all Kverneland ploughs can be equipped with different leaf springs packages. For soft soils, a normal spring with 5 leaves is the best choice to obtain the perfect ploughing in stony conditions. Today, most Kverneland ploughs are delivered with the Heavy Duty springs package (HD) with 7 leaves. This will perform well in most conditions. If the soil is very hard and stony - a double leaf spring package is recommended.
Extra leaves when needed
The standard Auto-Reset system includes 7 Kverneland heat treated springs (640Kp).
For heavier to extreme soil conditions, extra leaf springs are added for up to 1400kp.
The leaves are easily fixed with one central bolt only.
Individual body release !
The Kverneland mechanical Auto-Reset system enables very plough body to release independently. A quality ploughing is therefore guaranteed.
Minimum wear and high second hand value
Kverneland's Auto-Reset System is a quite simple construction that withstands the punishing forces year in, year out, with a minimum of maintenance. Save time and money !
Moreover, the Kverneland auto-reset system guarantees a longer life to the plough. When hitting an obstacle, the pressure on the point, frame, plough parts, decreases. The stress on Kverneland ploughs is therefore reduced. Consequently, second hand Kverneland ploughs sell at a higher value than competitors ploughs.
*by using an Hydraulic system, pressure would increase
.igg{float:right; padding:10px;}
.tdg{border-bottom:1px solid #dedede;}
.ttl{width: 100%;
height: 30px;
background-color: #eeeeee;
line-height: 26px;
padding-top: 2px;
font-weight: bold;
color: #fff;
margin-top: 10px;
color: #df0101;
font-size: 14px;
clear: both;}
.list ul{list-style:disc; padding-left:10px;}
.conn li{width:80% !important;}
.conn ul{width:700px !important;}
.trbordd tr{border-bottom:1px solid #dedede;}
.igg{float:right; padding:10px;}
.tdg{border-bottom:1px solid #dedede;}
.ttl{width: 100%;
height: 30px;
background-color: #eeeeee;
line-height: 26px;
padding-top: 2px;
font-weight: bold;
color: #fff;
margin-top: 10px;
color: #df0101;
font-size: 14px;
clear: both;}
.list ul{list-style:disc; padding-left:10px;}
.conn li{width:80% !important;}
.conn ul{width:700px !important;}
|
|
|
