5135 SW
| Price |
Contact for price |
Sale Type |
New |
| Year |
2017 |
Quantity |
N/A |
| Manufacturer |
Sunflower |
Model |
5135 SW |
| Vin |
N/A |
Color |
N/A |
| Date Received |
N/A |
Odometer |
N/A |
| Comments |
Three-Section Flexibility With Reduced Transport Heights
Sunflower now offers the 5135 Field Cultivator in a split wing configuration. The 5135 Split Wing Series features a three-section design with a reduced overall folded height. As a result, you can now transport a 36'-42' three section field cultivator with a maximum overall transport height of 13' 6".
Features
.igg{float:right; padding:10px;}
.tdg{border-bottom:1px solid #dedede;}
.ttl{width: 100%;
height: 30px;
background-color: #eeeeee;
line-height: 26px;
padding-top: 2px;
font-weight: bold;
color: #fff;
margin-top: 10px;
color: #df0101;
font-size: 14px;
clear: both;}
Staggered Overlapping Disc Gangs
With the exception of the 1300 , 1700 and 1800 series, every Sunflower disc features staggered overlapping disc gangs - one of the keys to level discing. The overlapped placement of the front gangs cuts all of the ground cleanly while the staggered rear gangs throw the soil back in a criss-cross pattern. This arrangement eliminates the need for a chisel shank or bulk buster typically required in the center and behind the front gangs of conventional tandems. Even more importantly - the Sunflower combination eliminates ridging in the center - another problem common with conventional tandem discs. Sunflower also makes sure the tires are placed close to the hinge line on the center section and the outside of each wing. This assures the disc will perform properly, without gouging, in rough or terraced ground. Some manufactures save money by simply extending the gang bars on the wings to make the next large size. This leaves the wing wheels too far inside and they cannot control the wings in rough or terraced ground.
Featured on all except: 1300, 1700 & 1800 series disc
Trunnion Mounted Bearings
Sunflower's trunnion bearings provide positive alignment, eliminate wear between the bearings and the housing and ensure positive lubrication. As the C-Flex™ bearing standards move, the gang bearings have to constantly realign. On conventional bearing systems the bearing moves within the housing. This eventually leads to wear between the bearing and the housing... then bearing failure, because grease cannot get into the bearing. With the trunnion bearing there is never any wear between the bearing and the housing and there is always positive lubrication. The trunnion bearing features triple lip seals that cannot be damaged by daily greasing and metal washers that protect the seals from being damaged by stocks or material wrapping around the gang shaft.
Featured on all except: 1700 & 1800 series disc
C-Flex™ Bearing Standards
Standard equipment on every Sunflower disc, the C-Flex™ bearing standards absorb disc gang shock created by stumps, rocks and normal discing. This extends the bearing, spool and disc blade life. A bonus feature is the C-Flex's™ ability to clear residue better than conventional rigid standards. The C-Flex™ bearing standards also allow for easy maintenance of the disc gang assembly. Just remove one bolt and loosen another bolt at each C-Flex™ location and the entire gang can be dropped. All C-Flex™ standards remain in place to assure the gang will be in the correct position when replaced. Unlike competitive machines the scraper bars are mounted to the back of the C-Flex™ Standards. This allows the scrapers to react with the gang and not come into contact with the spools or blades.
Featured on all except: 1700 & 1800 series disc
Spring Cushion Gang Assembly
The entire gang assembly pivots upwards when an obstruction is encountered. The heavy coil springs compress allowing the gang assembly to pass over the obstruction then expands to return the gangs to their working position.
Optional on 1700 & 1800 series
Rigid Gang Assembly
Standard equipment on 1700 & 1800 series
Self-leveling Hitch
Level the disc frame from front to rear with Sunflower's unique self-leveling hitch. This positive adjustment maintains a pre-selected setting regardless of the tillage depth. It features heavy-duty compression springs on each side of the pivot to cushion both front and rear gangs, important when crossing ditches or rough terrain. Some disc models offer optional hydraulic adjustment.
Featured on all series disc
Front-mounted Gauge Wheels
A trademark on all flexible Sunflower discs is front-mounted gauge wheels. This important feature prevents the front gangs of the wing frame from gouging, buckling or cutting deeper than the other gangs, promoting a level, ridge or furrow free field. The heavy-duty gauge wheels feature a 5-bolt hub and 8.00 x 10 ply tire.
Featured on all winged units except 1700 & 1800 series
Variety of Disc Blade Diameters
Sunflower offers a variety of disc blade diameters, thickness and spacing to allow you to select the best combination for your farming operation. All spools, whether precision machined cast iron or precisely fabricated steel, provide a perfect fit between it and the disc blade, resulting in smooth free turning gangs. High strength 1 3/4" to 2 1/2” diameter round stress proof gang shafts and factory assembled gangs are torqued hydraulically to approximately 1,500 pounds. Spring end collars (all except 1700 & 1800 series) on each end of the gang are collapsed slightly and make sure the gang stays tight. This results in thousands of trouble free acres.
Notched blades available on 1700 & 1800 series
Maintenance-free Lift Systems
Sunflower discs are equipped with maintenance-free lift systems. These systems pivot on space-age UHMW polymer sleeves eliminating greasing.
Maintenance Free Wing Hinges
Maintenance free wing hinges that utilize the same UHMW technology as the lift systems are used on some models.
Featured on all except 1300, 1700 & 1800 series
Wheel Assemblies - Walking Tandems
The walking beam pivot assemblies are comprised of two tapered roller bearings with triple-lipped seals.
Wheel Assemblies - Dual Wheels
For ease of service and strength, the wheel spindles of all configurations, dual, tandem or triples, slip into the spindle tube which is welded into the walking beam.
Wheel Assemblies - Walking Triple Tandems (1550 Series)
Center section walking triple tandems have 50% more weight carrying capacity than conventional walking tandems.
Attachments
Three Row H.D. Coil Tine Harrow
The H.D. harrow has 1/2” x 22” (12.7 x 559 mm) heavy duty tines on 12” (305 mm) centers, creating a 4” (102 mm) overall tine spacing. The configuration has 12” (305 mm) spacing between rows for better residue flow. Adjustable spring loaded mounting arms provide the necessary down pressure.
Available for: 1435, 1444, 1544, 1550, series
Three Row H.D. Coil Tine Harrow
The H.D. harrow has 5/8” x 26” (16 x 650 mm) heavy duty tines on 12” (305 mm) centers, creating a 4” (102 mm) overall tine spacing. The configuration has 12” (305 mm) spacing between rows for better residue flow. Adjustable spring loaded mounting arms provide the necessary down pressure.
Available for: 1700 & 1800 series
2-Bar H.D. Coil Tine Harrow & Reel
The two bar coil tine combined with a flat bar rolling basket. The harrow is designed with 12” (305 mm) between tooth bars and has five tine adjustment for tooth angle. The double tine tooth is 5/8” x 26" (15 x 650 mm) and the reel is 13” (330 mm) diameter with eight, 1/4” x 1-1/4" (6.3 x 31.75 mm) wide steel blades.
Available for: 1700/1800 series
Three Row Coil Tine Harrow
Features three rows of 3/8" x 16" coil tines on 2 1/2" centers spaced 15" between bars. Each tine is individually mounted for easy replacement - no need to disassemble a complete bar. Each section features backup protection and can be adjusted for tine pitch, height, tilt and down pressure.
Available for all Models except 1700 & 1800 series
Three Row Spike Drag Harrow
The three row spike drag features independence of each bar allowing maximum conformance to irregular terrain. Its weight provides the aggressive action necessary to handle tough soils while the 1" spikes on 1-3/4" centers effectively completes the seedbed and incorporation process.
Available for 1435 & 1544
Rear Tow Hitch
Several rear tow hitch options are available. The model shown in the photo features a slide hitch and ball joint for ease of hook-ups in limited space situations.
Trail hitches are available for all models except 1444 & 1544 series
|
|
|
