|
|
|
|
Documents:
|
|
|
INFORMATION DETAILS
ID: 14460727
|
Year: 2019
|
Make: Bush Hog
|
Model: Lift Disc Harrows 1D Series
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
|
Lift Disc Harrows
1D Series
Bush Hog’s line of lift disc harrows is designed to expand your tractor’s productivity potential! Whether you are a gardener, small farmer, wildlife manager, landscaper, operate a nursery or simply someone looking to break up the ground, the heavy duty frames and the heat-treated notched disc blades of Bush Hog® lift disc harrows make them the right choice for the job. The three disc harrow series in the Bush Hog® line are designed to fit tractors from 35 to 95 horsepower, giving you several choices to properly fit your tractor and application. Easy-to-adjust front and rear gangs allow you to change from light tilling to more aggressive cutting action with a simple pull of a pin and repositioning of the gangs. The sky, well actually the dirt, is the limit when using a Bush Hog® lift disc harrow to solve your groundbreaking needs.
|
|
Performance Features
|
-
Adjustable gang angles, front and rear, using an easy-tograsp handle
-
Cat 1 standard and quick hitch on the 1D and 2D series, along with Cat 1 and 2 standard and quick hitch on the 3D series
-
Variable Blade Spacings Available: 9” front and rear gangs for tough-to-cut “New Ground” • 7 1/2 in. front and rear gangs for finer soil finishing • 9 in. front gangs / 7 1/2 in. rear gangs–the best of both worlds
|
|
Construction Features
|
-
Square and rectangle tube steel frames and gang tubes
-
Self-aligning, sealed ball bearings
-
Notched disc blades for maximum cutting action
-
1 in. square, high carbon steel gang axle on the 1D and 2D series, with a 1 1/8 in. square, high carbon steel gang axle used on the 3D series
-
Available in tractor colors
-
Optional disc scrapers
|
|
Product Features
|
|
Bearing hangers reinforces with gussets
|
|
Easy-to-grasp handle for simple gang adjustment
|
|
Notched discs for maximum cutting action
|
|
Specifications
|
|
|
|
DESCRIPTION |
1D60 |
1D78 |
|
DRAWBAR HP REQUIREMENT |
35 HP |
|
HITCH TYPE |
Cat. 1 Std and QH |
|
MAX. CULTIVATION WIDTH |
60 in. |
78 in. |
|
APPROX. WT. LOAD ON EACH BLADE |
35-38 lbs. |
30-32 lbs. |
|
DISC BLADE SIZES NOTCHED |
16 in. or 18 in. |
|
DISC BLADE S PACING |
9 in. Front, 7 1/2 in. Rear or 9 in. Front/Rear or 7 1/2 in. Front/Rear |
|
DISC BEARING TYPE |
Self-aligning, sealed ball bearings |
|
NO. OF BEARINGS |
2 per gang |
|
FORWARD GANG ANGLE ADJUSTMENT |
Front Gangs – 0°, 7°, 14°, 21° |
|
REAR GANG ANGLE ADJUSTMENT |
Rear Gangs – 7°, 14°, 21° |
|
MAINFRAME FRONT TUBE CONSTRUCTION |
2 in. square tubing |
|
GANG ARM CONSTRUCTION |
3 in. x 1 1/2 in. tubing |
|
GANG AXLES |
1 in. square, high carbon steel |
|
DISC SCRAPPERS |
Optional |
|
|
|
Back
|
|
|
|
Address:
