|
|
|
INFORMATION DETAILS
ID: 13665641
|
Year: 2017
|
Make: Kverneland
|
Model: Taarup 5090 MT
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
|
Butterfly Combination
Kverneland Taarup offers a top-of-the-line mower conditioner combination with a 29'5" (9m) working width. It consists of a 3632 FT or 3636 FT front mounted mower conditioner with 10'6"/11'8" (3.2/3.6m) working width and two rear-mounted 10'6" (3.2m) mower conditioner units. There is no need for a special reverse drive tractor, as the 5090 MT fits perfectly on a normal tractor with front and rear linkage.
|
|
The Advantages:
|
-
29'5" (9.00m) working width
-
4 different output, 3 single swaths, 100% wide spreading, 3 swaths into 1 or two by two.
-
Pendulum suspension with 4 heavy duty springs.
-
Available with swath belt and FlipOver wide spreading.
|
|
Technical Specifications
|
|
|
Working Width |
Number of Discs |
Conditioning |
Power Requirements |
|
5090 MT |
29'5" (9.00m) |
24 (8x3) |
SemiSwing Steel Tines |
147/200 kW/hp |
|
5090 MT BX |
29'5" (9.00m) |
24 (8x3) |
SemiSwing Steel Tines |
155/210 kW/hp |
|
|
Highlights
|
Cutterbar with Round Discs
-
Kverneland Taarup uses round discs. Round discs are less susceptible to stone impact, and reduce shock loads in the transmission.
-
Stones are expelled immediately, before they have any chance of becoming jammed. The benefits are lower repair and maintenance costs - at the same time as a clean and aggressive cut.
-
The cutterbar has a high oil capacity, ensuring a very low working temperature. This ensures an efficient oil cooling and lubrication of the entire cutterbar.
-
The long curved gear wheels running in oil provides a very quiet and reliable power transmission.
-
The fully welded cutterbar gives a very stiff and strong design for high durability.
-
With the ProFit quick knife change system, maintenance of the cutting ability is easy. The knives are changed by one simple operation using the special lever.
|
4 Different Output
-
Kverneland Taarup 5090 MT is the most flexible mower conditioner solution on the market. It can be equipped with wide spreading equipment and the Kverneland Taarup BX Auto-Swather solution to ensure outstanding flexibility. It is easy to change between the different configurations, and conversion is very quick.
-
Kverneland Taarup 5090 MT can be set for 3 single swaths, wide spreading or three swaths into one with the Kverneland Taarup BX-Belt. An extra feature is the fact that the right belt can run in two directions, meaning that the Kverneland Taarup 5090 MT will place grass from 6 m into one swath.
|
Suited For All Conditions
-
The BX-Belt is capable of placing crop from either 6 or 9m into a single swath. The right hand belt can run both left and right, giving the option of placing three swaths into one, or in a two by two formation.
|
Pendulum Suspension
-
The 5090 MT and 5090 MT BX are fitted with a balancing weight arm, linked to the 4 heavy duty ground pressure springs on top of the three point suspension, to ensure an even weight distribution of the two rear sections.
-
The low gravity scale arm suspension ensures that the mowing units always remain horizontal in relation to the ground, when working in uneven or hilly conditions, or if the tractor is hitting small obstacles in the field.
-
When using SideShift equipment, the balancing arm also facilitates equal ground pressure on either side of the rear mower units.
|
5090 BX-Belt
-
Kverneland Taarup 5090 MT can be set for 3 single swaths, wide spreading or three swaths into one with the Kverneland Taarup BX-Belt.
-
An extra feature is the fact that the right belt can run in two directions, meaning that the Kverneland Taarup 5090 MT will place grass from 6 m into one swath.
-
When not in use the optional Kverneland Taarup BX-belt is raised hydraulically to a position above the mowing units. All you need to do is to push the button on the control box to change the configurations.
-
The Kverneland Taarup BX-Belts are floating on two large springs, and thus performing a unique and even swath formation under all conditions (no jumping up and down of belt units). A unique and simple solution with several advantages.
-
Fewer moveable parts, ensuring less wear and maintenance.
-
Better flotation of the entire machine.
-
Even swath formation under all conditions.
|
FlipOver Wide Spreading
-
As an option the Kverneland Taarup mower conditioners can be equipped with wide spreading equipment. In this way, crop can be cut and spread in one operation, saving both time and at least one tedder operation.
-
The spreading vanes of the Kverneland Taarup FlipOver system are placed further back on the mowing unit than with conventional systems.
-
This is thanks to the spreading plate positioned far to the rear when in use. The improved distance between the conditioning rotor and the spreading vanes gives a more even spreading across the entire working width. A more even spreading ensures a better wilting.
|
SemiSwing Steel Tine Conditioning
-
The SemiSwing conditioner system combines the aggressive conditioning seen from fixed fingers with the excellent tine protection typically associated with free swinging tines.
-
During normal operation the tines are fixed for effective conditioning, but if a SemiSwing tine comes into contact with an obstacle, force will exceed 22kg (48.5lbs) and it will spring back and leave a generous space for the obstacles up to 103mm to pass.
-
The complete conditioner tine has been redesigned to move the centre of gravity. The result is that the tine will stay in position when hitting the crop, to give full conditioner effect and to minimise wear and tear on the turning points.
-
The angle and position of the SemiSwing tines give a better crop transport. The crop is moved away from the conditioner rotor, resulting in reduced risk of blockages and full effect of the conditioner plate.
|
|
Back
|
|
|
|
Address:
