|
|
|
INFORMATION DETAILS
ID: 13651471
|
Year: 2017
|
Make: Farm King
|
Model: Post Driver
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
Model 1450
The Farm King 3-Point post driver works with your tractor or skid-steer for efficient effortless post driving. Built to be fast, powerful, durable, and maneuverable, Farm King 3-Point post drivers are ideal for use on the jobsite or on the farm.
Model 2400
Farm King 2400 trailered post drivers makes work easy. Available in a PTO or 9hp engine models, Farm King post driver trailers can work with a tractor or behind a pick-up truck. Designed to be maneuverable and durable Farm King post drivers are perfect for farmers, ranchers, and contractors. |
|
Features
|
Model 1450
Standard Equipment
-
Category I and II 3-point hitch
-
Optional skid steer Quick-Tach mount frame
-
Integral stand
-
PTO driven hydraulic pump
-
Self-contained hydraulic system
-
Full hydraulic controls
3-Pt Base
-
6" x 8" base pads, wide stance for stability
-
Welded, tubular steel construction
-
Category II bushings included
Skid Steer Quick-Tach Mount Frame
-
45" wide, 235 lb (107 kg)
-
Includes hydraulic drive motor with couplers
*skid steer must be equipped with Quick-Tach carrier
Optional Equipment
|
Model 2400
Standard Equipment
-
PTO or engine driven hydraulic pump
-
Self-contained hydraulic system
-
Full hydraulic controls
-
Large hammer face
-
Hammer ballast box with lid
-
Welded frame, axle and counter weight box reduces set up time
-
Rear stand to prevent backward flip over
Optional Equipment
-
Mast extension
-
Hydraulic extendable hitch
-
2" ball hitch receiver
-
6.70 x 15 4-ply bias tires
-
Post guide
-
Post rack
|
|
Specifications
|
|
Model |
1450 |
|
Frame |
All welded tubular steel construction |
|
Assembly |
Cat. I or II 3-pt hitch or opt. skid steer mount |
|
Mast |
12" (305 mm) wide track |
|
Hammer weight |
310 lb (141 kg) |
|
Impact at full stroke |
100,000 lb (45,360 kg) |
|
Hydraulic requirements |
6-8 gpm @ 300-500 rpm (22.7-30.3 lpm @ 300-500 rpm) |
|
Maximum hammer height |
Standard lift 105" (2.67 m) |
|
Minimum hammer height |
43" (1090 mm) |
|
Maximum hammer stroke |
62" (1570 mm) |
|
Leveling adjustment |
2" x 8" cylinder on mast (1) / 2" x 8" cylinder on hammer pivot (1) |
|
Angle of tilt, from vertical |
Front / Back: Fore 15° / Aft 35°, Side tilt: Left 22° / Right 22° |
|
Hydrualic pump |
12 gpm @ rated speed |
|
Basic shipping weight |
1135 lb (515 kg) |
|
|
|
|
Model |
2400, Engine or PTO Drive |
|
Frame |
All welded tubular steel construction |
|
In frame counterweight box |
15" x 15" x 25" – 3.2 cu. ft. (92L) |
|
Wheel track width |
69" (1750 mm) |
|
Wheel rims |
15" (381 mm) (6.70 x 15 4-ply bias tires optional) |
|
Wheel bearings |
Tapered roller |
|
Mast |
12" (305 mm) wide track |
|
Hammer weight |
310 lb (141 kg) empty, up to 700 lb (318 kg) ballasted |
|
Impact at full stroke |
100,000 lb (45,360 kg)* |
|
Maximum hammer height |
Standard lift 105" (2.67 m), 128" (3.25 m) with optional mast extension |
|
Minimum hammer height |
43" (1090 mm), 66" (1676 mm) with optional mast extension |
|
Maximum hammer stroke |
62" (1570 mm) |
|
In & out hammer slide |
16" (410 mm) |
|
Hammer tilt, from vertical |
Fore 20° / Aft 15°, Side Tilt: Left 40° / Right 22° |
|
Basic shipping weight |
PTO: 1190 lb (540 kg), Engine: 1300 lb (590 kg) |
|
Back
|
|
|
|
Address:
