|
Features
|
Filling
The NAVIGATOR is standard with 2" nurse tank quick filling device |
TurboFiller
The HARDI TurboFiller is able to handle large quantities of powders and liquids. Its high capacity is achieved through a combination of high vacuum and liquid rotation inside the hopper.
TurboFiller uses high pressure rotating liquid to completely mix the powder and liquid chemicals before they are sucked into the sprayer.
-
High mixing capacity
-
Very high vacuum and suction capacity
-
Rotating nozzle used for cleaning containers and the TurboFiller itself
-
3 ft. Cleaning pipe
|
Chassis
Surface treatment
The chassis and all other steel components have been pre-treated with zinc phosphate before the application of a high-quality coating of powder paint.
Surface Treatment:
-
UV protected
-
13 steps of cleaning, degreasing and preparation
-
Hardening at 200°C for one hour
-
Will last at least 1000 hours in salt fog test, without any corrosion
|
Excellent clearance
The unique design of axle and frame ensures excellent crop clearance, reducing crop damage to the absolute minimum. No components are lower than the axle.
The NAVIGATOR has the lowest possible center of gravity without compromising clearance under the sprayer.
Excellent crop clearance, 27 in.Low center of gravity |
SmoothRide
SmoothRide suspension consists of two long-lasting polypropylene dampers which absorb the sprayer’s movements.SmoothRide gives a better ride of the sprayer, resulting higher capacity and more comfort.During transport the boom will not be pushed so hard, and in the field, the boom suspension will allow optimim height over the crop |
Tanks
All Tanks are made from UV protected polyethylene. They have a very flat surface and no inside walls.
Main Tank
-
Capacity -Maximum 3000 (800 gal.) - 3500 (1000gal.) - 4000 (1200 gal.) - 6000 (1600 gal.)
-
Very low center of gravity
-
Efficient agitation
-
Very deep central tank sump
-
Easy to rinse inside with tank rinsing
|
RinseTank
-
Capacity - 130 gal.
-
Adequate liquid for both outside & inside cleaning
-
Placed on axle for added stability
-
Level indicator
|
Clean Water Tank
-
Capacity - 5.25 gal.
-
Well integrated into the front cover
-
Easy filling from the platform
|
Liquid systems
Flush & Rinse kit
The Flush & Rinse kit allows the operator to flush and rinse the liquid system.
-
Easy operation
-
Boom flush – clean water is used from the RinseTank and is flushed to the boom and sprayed out by the nozzles
-
Tank flush - clean water is used from the RinseTank and sprayed into the main tank
|
CycloneFilter
The HARDI CycloneFilter is a unique self-cleaning pressure filter. The cyclone created inside the filter increases the speed of the liquid against the filter screen, thereby increasing the effectiveness of the self-cleaning action.
-
Self-Cleaning
-
Flow capacity 105 gpm.
-
No spills due to upright position
-
3 postion boost valve: self-cleaning on, self-cleaning off and turbo boost for flushing the filter
|
HARDI pump
The NAVIGATOR liquid system is driven by the robust grease-lubricated HARDI diaphragm pump or the the ACE hydraulic drive centrifugal pumps.
On the HARDI pumps the diaphragms separate the liquid from the vital parts of the pump such as its bearings and crankshaft, ensuring reliable and durable operation.
-
Self-priming
-
Open crankcase
-
Able to run dry without damage
-
Easy service pump
-
No contact between chemicals and moving mechanical parts
|
EasyClean filter
EasyClean Filter is a high capacity suction filter with a very large filter surface. The external SafeSpray gauge monitors the the filter ensuring the filter is only cleaned when needed. When opening the lid, the main valve is automatically turned off. Dirt traps inside the filter ensure impurities are removed from the system.
-
SafeSpray Vacuum gauge monitors filter condition
-
Easy to clean
-
Dirt trap
-
Auto shut-off
-
Flow capacity 119 gpm.
-
Large surface area 229 in2
|
Pressure regulation
The pressure regulation system is based on a high-capacity, high-speed bypass valve. A bleed line in the valve causes constant flushing to prevent residue build-up in the valve
-
High-capacity, high-speed valve
-
Reliable, well proven
-
Maximum flow: 158 gpm. at 12 psi
-
Manual override
-
Easy to clean
|
EAGLE: 45 - 120 feet
EAGLE boom is well-known around the world for its performance under the hardest conditions.
Two new models of DualFold EAGLE booms are now available. 90'-60' and 120'-90' alowing the use of a larger boom to spray smaller, tighter fields.
All booms come with:
-
well protected nozzle holders and a non-directional spring loaded breakaway system
-
suspensions with coil springs to damper up and down movements and Anti-yaw dampening of horizontal movements through rubber buffers.
-
2-dimensional boom offering unequalled performance in rough conditions and fast spraying speeds
-
Adjustable nozzle holders
-
Self-stabilizing trapeze suspension
|
FORCE 132' Boom
The HARDI FORCE boom is top of the line in conventional spraying, available in 80 to 132 feet. The HARDI FORCE is the perfect choice for large-scale farmers and contractors looking for unmatched performance and dependability. The rugged three-dimensional structure guarantees unrivalled durability.
FORCE boom features:
-
3-dimensional high performance booms
-
Boom suspension with coil spring pendulum, telescopic dampers and patented HARDI adjustable guide rod system.
-
Anti-yaw device incorporated in the design
-
Mechanical lock between the intermediate and outer boom sections
-
HPZ is operated by electric/hydraulic, direct activated (DAH)
-
Stainless steel spray lines are standard
-
TRIPLETS with non-drip valves
|
NORAC (Optional) Boom Height Control
The NORAC AutoHeight system will control automatically the height and tilt functions of the boom. This gives the driver a much easier control of the boom and the result will be a better spray application.
-
Automatic boom height and tilt corrections
-
Choose between soil or crop mode
-
Proportional valve for smooth movements
-
3 robust and precise ultrasonic sensors
-
Optional 2 extra sensors for rough terrain
-
Tested under rough conditions at more than 12.5 mph.
|
Electronics
HC 5500
The HARDI Controller 5500 is the choice for advanced farming. The operator is instantly informed of operation status and warned when vital parameters like pressure, speed, etc. are not correct.
-
Advanced, user-friendly
-
LogicMenu
-
IntelliTrack control
-
Provides more information, controls more features
-
Rates changed on the go
-
Hot keys
-
AutoSectionControl ready
|
HC 6500
The HC 6500 is designed specifically for spraying Multi-purpose computers often compromise on detail as they miss the specifics a sprayer specialist holds. The more complex a product, the simpler it should be to use. Intuitive controls The operator has the best possible man-machine interface for spraying. The joystick grip is the primary control and it can be placed close to the operator It holds all the most used functions.
The color screen has excellent readability in sunlight It shows six information windows. The operator can choose what is to be shown in five of them When entering a value, the readout assumes a large format to ease legibility It also has backlighting and a specific view for night-time spraying.
The HC 6500 has a help function that is always active. It can be pressed at any time for an explanation of the current process When service reminders and critical operation warnings appear, the help key offers further information. The operator is never in doubt. |
ISOBUS compatible
The HARDI NAVIGATOR sprayer can be operated with a virtual ISOBUS terminal. The customer can order a HARDI sprayer and use the intelli-gent functions direct from his own ISOBUS terminal.
To make the complex sprayer operation easier, the proven HARDI GRIP will be delivered with the NAVIGATOR sprayer so all primary spray functions, such as on/off and section switches as well as the hydraulic operation can easily and safely take place by means of a joystick.
Integrated AutoSectionControl
If the existing Virtual terminal has an automatic section control, following the de-fined task controller function of the ISOBUS standard, for example the John Deere Sprayer Pro, the ISOBUS terminal can operate the distribution valves of theNAVIGATOR, so the customer does not need a separate HARDI AutoSec-tionControl.
Updating
Existing NAVIGATOR sprayers can be updated to an ISOBUS sprayer. That is also possible for sprayers which will now be ordered with the HARDI CONTROLLER 6500. The customer only has to buy the ISOBUS bridge, so the ISOBUS terminal can communicate with the HARDI jobcom.
|