|
|
|
Documents:
|
|
INFORMATION DETAILS
ID: 13650625
|
Year: 2017
|
Make: Sunflower
|
Model: 9412
|
Type: New
|
MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
A Genuine No-Till Three Point Drill
For maximum productivity, Sunflower developed the 9412 three-point mounted all purpose grain drill line. The 9412 is one of the only mounted true no-till grain drills on the market. It can easily be hand adjusted from conventional seeding right through residue-laden no-till. This heavy weight rigid seeder is offered in widths from 10' up to 20' and adapts to either category II or III hitches. And if your tractor is missing a three-point or you want to operate a drill larger than your tractor can handle, simply convert the 9412 to a pull-type by utilizing Sunflower's Transport Pull Hitch. Sunflower Grain Drills deliver seeding quality.
|
Features
|
Extra Heavy Frames
Heavy duty 3/8" thick 7" x 7" main frames are coupled to a 3/8" thick 3" x 5" opener frame to create a sound foundation for all Sunflower grain drills.
9300, 9400, 9500, 9600 series drills
|
All Purpose “Heads Up Opener
All-purpose openers feature wide set 1/2” parallel links for better depth control and “dead on accuracy” in seed placement. Two 400lb. retention springs can generate 420+lbs at the pinch point of the opener blade! Down pressures can be easily adjusted from no-till to conventional seeding without the need of tools. 15” diameter x 3.5mm “Heads Up Opener Blades” eliminate pairing of rows, premature leading blade wear and side loading of bearings.
9300, 9400, and 9500 series drills
|
Conventional Opener
The single arm mount conventional openers are mounted at an 8-inch stagger to promote residue flow through the seeding system. The single point mount bearing is protect by UHMW bearings to prevent wear and reduce service time. The pneumatic down pressure system maintains an even down pressure on all row units and eliminates the down pressure spikes that occur with spring activated down pressure systems.
9600 series drills
|
Seed Hoppers
With the largest seed hoppers in the industry ranging in seed capacity from 2.4 to 3.75 bushels per foot, the all welded boxes are constructed of heavy 16 gauge steel with 3/16 inch thick end plates. The bolt in hopper bottoms allow multiple row spacing using the same hopper.
9300 series (2.4 bu.), 9421 & 9600 (3.0 bu.) series, 9400 & 9500 series (3.75 bu.),
|
Seed Meters & Adjustments
The infinitely variable meters are very gentle on seeds and provide a continuous flow of material unlike fluted meters that drop seed in groups. This has a better singulation affect than dumping small groups of seed as found in fluted meter operations. Rates are easily changed with a lever adjustment system on each hopper system.
Seed Meter: All models
Adjustment Lever: 9435, 9531 and 9600 series
|
Walk Boards
9000 series drills sport an automatically locking walk board. Lift the walk board to the raised position and the lock will engage, placing the pin in the lock position will ensure it will stays locked.
The walk board is deep for operator safety and the ladder simply folds over the walk board rather than under it. Attached to the ladder mount is a folding handle to assist the operator in mounting the walk board. When not in use it easily folds down for storage.
Walk Boards: All models
Assist Handle: 9435, 9531 and 9600 series
|
Back
|
|
|
|