2017 Teagle Tomahawk 404M Straw Mill D & W Group

CONTACT SELLER

D & W Group - Red Trac

905-562-4136

Address:

2695 Regional Rd #24 South
Vineland, Ontario
L0R 2C0

View All Inventory

Visit Dealer Web Site

Teagle Tomahawk 404M Straw Mill Contact for Price Back to Search Results

send to a friend

print this Ad Can't find it?

Documents:

Videos:

Video 1

INFORMATION DETAILS

ID: 13650566	Year: 2017
Make: Teagle	Model: Tomahawk 404M Straw Mill
Type: New
MSRP: N/A	Engine Size - cc: N/A

Drum Diameter :	5'2''
Maximum Round Bale Diameter :	4'0''
Maximum Rectangular Bale Size :	4' x 3'
Height Overall with machine on ground :	6'11''
Width with chutes closed :	6'6''
Lower chute discharge height :	1'4''
Upper chute discharge height :	3'7''
Length Overall :	6'11''
Drum Extensions Available :	1' x 2' x 4'
Operating Width :	6'9''
Weight :	1,425 lb
PTO power required :	80HP

SELLER DESCRIPTION

Comfortable livestock are more productive.

For straightforward processing the 404M/505M/505XLM range offers fast effective milling of straw and miscanthus to a very consistent and fine length.

Operation

Blow straw up to 30', discharge to one or both sides of the tractor. Alternative delivery chutes are available to suit your requirements.

The Tomahawk 404M, 505M and 505XLM use Blades or Hammers to chop dry material until small enough to pass through the holes in a screen. A range of screens are available with holes from 15mm to 36mm to obtain material of a consistent chop length.

Easy control of output by adjusting the speed of drum rotation.

Configurations

Tomahawk 404M - Suitable for 1.2m (4') diameter bales.
Tomahawk 505M - Suitable for 1.5m (5') diameter bales.
Tomahawk 505XLM - Suitable for 1.5m (5') diameter bales and full size Hesston bales.

Various drum extensions are available for ease of operation or to accommodate larger rectangular bales.

The 404M/505M/505XLM range is suitable for dry material only, and will not cut silage as it will block the mill sieve.

British built and backed

For your peace of mind Tomahawks are backed by an efficient after sales service from our production facility in Cornwall, England.

The Tomahawk Drum models are economical, simple and robust. There are no gearboxes, with the drive to the rotor being direct from the tractor, a hydraulic motor is used to rotate the drum. Due to their simplicity and strength, customers can expect a long service life from their Tomahawk.

Features

Direct Drive

Direct drive from tractor to rotor - no gearbox.

Choice of Material Chop Length

Length of material is determined by the screen which is fitted. The nature of the material has some effect upon actual shredded length and some variation is likely to occur. Screen sizes available are 10, 12, 15, 18, 21, 36, 50mm holes and 120mm slots.

Knife System

Knife system for high feed rate - use only with screen sizes greater than 12mm.

Hammer System

Hammer system for heavier duty or stoney applications and very short chop lengths.

Easy Loading

Netting or wrap is easily removed at a safe working height. Adjustment of the drum angle with the optional hydraulic top link makes the operation even easier.

Chute On/Off Levers

Chute on the left and right hand sides can be opened and closed independently.

Back

INFORMATION REQUEST



First Name*:
Last Name*:
Telephone*:
Email*:
Comments*:
Let's make sure you're human. Drag or click the correct shape on the left to move it to the grey "drop area" on the right

Industries

Our Solutions