|
|
|
Documents:
|
|
INFORMATION DETAILS
ID: 13649563
|
Year: 2017
|
Make: Case IH
|
Model: TD102
|
Type: New
|
MSRP:
N/A |
Engine Size - cc: N/A |
Cutting width, ft in (m): | 10' 4'' (3.15) |
Cutting height range, in (mm): | 0.95-3.2 (24-81) |
Weight, lbs (kg): | 2,610 (1186) |
Number of discs: | 8 |
Knives per disc: | 2 |
Disc cutting diameter, in (mm): | 19.7 (500) |
Disc speed, rpm: | 3000 |
Position relative to Tractor: | Trailing, side-pull |
Swath width, ft in (m): | 7' 11'' (2.41) |
Tractor horsepower (kW): | 60 (45) |
PTO rated speed, rpm: | 540 |
Transport width, ft-in (m): | 10' 10'' (3.30) |
SELLER DESCRIPTION
Pull-Type Disc Mowers
|
The Case IH TD102 pull-type disc mower features a smooth ride, clean cut, superior trailing ability, low transport height and easy tractor hookup.
|
Superior Crop Flow
The Case IH TD102 pull-type disc mower features a modular cutterbar design for superior crop flow that reduces streaking and ensures quick mowing. The cutterbar is designed with:
• Shock protection to minimize repair expense
• Discs protected from internal gear damage by the drive hub
• Crop deflector shields located behind each end of the cutterbar to direct cut crop into a wide swath inside the tire path
• Two end discs that co-rotate to provide a narrower swath
• Able to adjust swath from 60 in–95 in (1.5 m–2.4 m)
• Left cutterbar shield is hinged for easy service access
|
80-degree Constant Velocity Joint
• Overload protection is standard
• Primary PTO uses an 80-degree constant velocity joint at the tractor end to permit tight turns, reduce noise and extend service life
• Standard tractor tire bumpers protect PTO driveline and tractor tires
|
Adjustable From 2-10 Degrees
Tilt is adjustable from 2–10 degrees using a mechanical turnbuckle.
|
Easy Transport
Attaching and detaching the mower from the tractor is easily accomplished with a simple clevis hitch . The TD102 can be pulled by lighter-weight tractors , as weight is pulled versus carried on a 3-point hitch.
• Transport width is just 10 ft 10 in (3,300 mm) when end shields are folded
• Removable parking jack stand is stored on top of tongue assembly
• Hydraulic tongue swing cylinder powers the unit from transport to operating position
• Has a 12-in (305-mm)-minimum cutterbar ground clearance in transport position
• Hinged right-side cutterbar shield folds up for narrow transport
• Safety tow chain standard
• Low transport height eliminates the need for implement lights
|
|
|
TD102 Highlights
|
The Case IH TD102 pull-type disc mower features a smooth ride, clean cut, superior trailing ability and narrow transport width, plus easy tractor hookup using a simple clevis hitch. |
​Quick Specs
Cutting Width: 10 ft 4 in (3.16 m)
Number of Disks: 8
Number of Knives/Disk: 2
Input Speed: 540 rpm​
|
Back
|
|
|
|