|
|
|
INFORMATION DETAILS
ID: 13645184
|
Year: 2017
|
Make: Case IH
|
Model: MDX41 (Econ)
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
|
Rotary Disc Mowers
|
|
Case IH rotary disc mowers handle tough conditions while delivering clean cutting performance, maneuverability, durability and overall value.
|
Modular Cutterbar
• Results in superior crop flow that reduces streaking
• Ensures quick mowing
• Heavy-duty frame and rugged canopy use a cantilevered design for smooth crop flow across cutterbar​
|
Smooth-profile Discs
• Lift crop into the cutting zone for plug-free mowing, provides a consistent swath for more even drying
• Each disc is 3/16-in (4.8-mm)-thick and heat treated to resist damage
• Discs are shielded by 1/4-in (6.4-mm)-thick by 8-in (203-mm)-wide skid shoe. The shape of skid shoes work with the tilt of the cutterbar to provide a wide range of mowing heights
• The gearbox oil in modular cutting discs performs up to 200 hours between changes
|
Rotating Modular Knife Blades
A rotating modular knife blade provides thorough and uniform crop cutting.
• Each disc houses two knife blades
• Blades rotate at 3,000 rpm
• Disc hardware is specially designed and treated for extreme durability to resist abrasive conditions
Independent, Sealed and Self-Contained Modules Resit Damage
• ​Short, independent splined driveshaft sections link modules
• Shafts are made from alloy steel with roll-formed splines for strength and are hardened for added durability
|
Maintenance/MD82_00404_03-09_mr.jpg?width=420&height=210)
​• Reversible knife blades change quickly without raising the cutterbed
• Knife bolts are located on top of the modular discs for easy access
• Discs can be in any position when performing maintenance
• If an object is struck during operation, a spring-loaded cutterbed breakaway latch releases
• Greasable, sintered bushings ensure the cutterbar releases fully when the breakaway latch is activated
• A heavy-duty, puncture-resistant curtain provides protection for operator and bystanders
• A polyester-vinyl curtain tilts the crop forward for better flow across the cutterbar
• High-stress components are protected from debris by T-seal washers and lip seals
|
Hassle-free Transport/MD92_00109_03-09_mr.jpg?width=420&height=210)
• ​The cutterbar transport lock automatically engages for a secure hold
• The cutterbar is spring-balanced from end to end: allows the mower to glide over uneven terrain smoothly and can be adjusted for all conditions.
• The V-belt tension spring has an easily visible indicator for quick inspection of belt tension: changing belt tension is convenient with single-point adjustment and no shields to remove.
• A tethered pin activates the flotation spring for cutting and is repositioned when using the parking stand
|
|
|
MDX41 (Econ) Highlights
|
|
MDX41 rotary disc mower has an 7 ft 11 in cutting width, 6 oval cutting discs and a 540-rpm PTO driveline with overrunning clutch to protect the tractor driveline. |
• Two high-quality, reversible knives per disc on four, five or six oval cutting discs
• Rock guards and skid shoes to protect discs and carry the cutterbar over uneven ground
• An enclosed gear-driven cutterbar that provides years of reliable service
• A 540-rpm PTO driveline with overrunning clutch to protect the tractor driveline
• Adjustable flotation springs for changing cutterbar ground pressure
• An articulation joint that allows mowers to operate above and below horizontal
• A spring-loaded breakaway latch that protects the cutterbar
• A single-acting hydraulic cylinder that easily lifts the cutterbar after each pass
3-point hitch mounting
|
Back
|
|
|
|
Address:
